VAS 5900 – Workshop Battery Charger

The robust battery charger for workshop in compact HF-construction.

Self-recognizing tension choice for 6-12-24-V with 30 A nominal charging current within all ranges. Careful and accurate IUoU characteristic according to Volkswagen-QA-standard with a load preservation and an external voltage mode (alternate current source).

  • Modes of operation: charge (lead acid, gel, AGM), load preservation, trickle charge in the electrical system, alternate current supply, refurbishing charge during over-discharging.
  • Battery charger in rugged steel housing with plastic caps.
  • Dimensions: 290 x 75 x 144 mm (w x h x d)
  • Weight: 2,0 kg
  • Mains Connection: 230 V 50 Hz
  • Rated power: 860 Watts
  • ASE-Nr. 447 030 00 000

VAS 5900A – Intelligence for Your Workshop

The VAS 5900A represents an advanced logical development of the proven garage battery charger VAS 5900.

Today, electrical power demand on the vehicle power circuit during diagnosis and repair work is consistently very high in all vehicle models. This work would be unmanageable without a vehicle power circuit support of a garage charger.

With a rated current capacity of 35 A and an easily legible, computer animated user prompt system, we have adapted a new device generation to today’s requirements for battery chargers in garage repairs.

State-of-the-art inverter technology provides economical and ultra-fast performance of processes and supplies all current and voltage requirements of the vehicle power circuit, reliably and according to need.

A robust aluminium housing with practical soft rubber edges guarantees reliable operation even under the toughest conditions and provides effective protection against any vehicle damage when the device is placed in or on top of the vehicle. Pluggable power and charge cables provide secure handling during use and afterwards during storage.

Today, when deciding on an investment in such tools, it is important that not only long operational life, but also usability in future applications requirements are assured.

The functionality of the VAS 5900A can be updated via a data interface and it is pre-equipped with several slots for additional hardware requirements.

  • Modes of operation: Charge mode, power supply operation/auxiliary power supply, support operation/diagnosis, refresh mode
  • Robust aluminium-plastic housing with soft rubber edges.
  • Dimensions: 247 x 88 x 162 mm (LxDxH)
  • Weight: 2,0 kg
  • Power supply: 230 V AC 50 Hz
  • Rated power: 375 Watt
  • ASE-Nr. 447 030 01 000

VAS 5901A – The Plug-In Battery Charger

Extremely small HF-battery charger for 12 V with enormous 6 A rated current.

The little giant is ideal for respectively float charging and recharging storage vehicles and at the vehicle supply. With exact IUoU characteristic this high performance equipment charge batteries with 100 Ah within 24 hours.

Charging in the vehicle power circuits by OBD-II-plug or alternatively by fully insulated charge clamps make it easy to apply.

  • Modes of operation: charging, testing, checking, replacement
  • Unbreakable plastic housing with LC-display
  • Dimensions: 119 x 72 x 52 mm (WxDxH)
  • Weight: 250 g
  • Mains connection: 230 V 50 Hz
  • Rated Power: 60 Watts
  • ASE-Nr. 447 031 01 000

VAS 5903 – the Power Specialist

The power charger is a guarantor for safe current supply at intensive current work in the vehicle power circuits like flashing of controllers.

Charging with 12 V and 70 A creates short charging times with precise charge quantities by IUoU charge characteristics according to Volkswagen QA standard.

The integrated current consumption test I-CHECK automates test functions for the warranty handling of starter batteries according to QA standard.

The equipment is updateable and can always be adapted by the operator by simple software change to the current functions of the Volkswagen standards.

  • Modes of operation: Diagnostics and charging mode, rapid charging, external power supply, refresh mode, current input testing
  • Unbreakable steel housing with plastic caps and soft rubber edge protection
  • Exchangeable mains and charging cable, USB connection
  • Dimensions: 315 x 200 x 110 mm (WxHxD)
  • Weight: 6,5 kg
  • Mains connection: 230 V 50 Hz
  • Rated power: 1080 Watts
  • ASE-Nr. 447 033 00 000

VAS 5906 – the Showroom Charger

A high performance 12 V charger with 30 A rated current.

Particularly construed for the vehicle power circuit supporting of exhibition and presentation vehicles. The VAS 5906 assume the supply of consumers in the vehicle power circuit up to 30 A and recharges the battery at loads over 30 A afterwards up to 14,4 V vehicle power circuit, in order to keep the vehicle operational with 13,5 V.

Simple handling without any adjustment. Plug power supply, connect charge clamps, ready – simple plug & play.

An optical appealing design in an aluminum housing with a very flat building method. The charger fits under each vehicle and can also be operated in the interior of the vehicle. Absolutely noiseless without a ventilator.

  • Modes of operation: Charging operation, buffer operation, float charging
  • A robust aluminum housing with plastic caps and soft rubber edge protection
  • Exchangeable mains and charging cable, data communication connection
  • Dimensions: 247 x 162 x 88 mm (WxHxD)
  • Weight: 2,4 kg
  • Mains connection: 230 V 50 Hz
  • Rated power: 375 Watts
  • ASE-Nr. 447 037 00 000

VAS 6565 – The High Voltage Charger

A high voltage workshop battery charger with variable charging voltage from 100 up to 600 V and 3,0 A rated current.

The VAS 6565 is particularly designed for charging traction batteries of hybrid vehicles in workshop use.

A selectable characteristic referred to the vehicle model ensures an ideal charge expiration with battery-specifically limited charge quantity.

Exchangeable charging cables and a updateable software guarantee the compatibility to future vehicle models.

  • Modes of operation: Charging
  • Actually the characteristics for Volkswagen Touareg hybrid, Porsche Cayenne hybrid and Porsche Panamera Hybrid are deposited.
  • Robust steel housing with handholds
  • Exchangeable mains and charging cables, USB interface
  • Dimensions: 380 x 180 x 300 mm (WxDxH)
  • Weight: 8,5 kg
  • Mains connection: 200-240 V 50/60 Hz
  • Rated power: 1950 Watts
  • ASE-Nr. 447 040 00 000
Since September 2012 there ist a software-update for the VAS 6565 and VAS 6565A with additional charging profiles.

The following download is a .zip-file, which includes 5 data records.

  • Update-information VAS6565A
  • Operating Instruction Software-Update
  • Software AXVAS6565
  • Charging profiles
  • Firmware

Please carry out the installation exactly as described in the operating instructions.